BPDRB - E-241, ELMER'S WATERPROOF GLUE-RESIN PART 1

  • MSDS: BPDRB
  • Manufacturer: BORDEN INC
  • Product Name: E-241, ELMER'S WATERPROOF GLUE-RESIN PART 1
  • National Stock Number: 8040-00N030127
Product Identification

Product ID:E-241, ELMER'S WATERPROOF GLUE-RESIN PART 1
MSDS Date:12/11/1986
FSC:8040
NIIN:00N030127
Kit Part:Y
MSDS Number: BPDRB

Responsible Party
BORDEN INC
180 EAST BROAD ST
COLUMBUS, OH 43215
US

Emergency Phone: 614-431-6600

Info Phone: 614-431-6680

Cage: 07982

Contractor
BORDEN INC
208 COLUMBUS, OH 43215-3705 US

Telephone: 614-225-6124

Cage: 07982

Ingredients

W/APPROP USE OF PERSONAL PROT EQUIP & PRUDENT WORK

RTECS: 9999999ZZ


ISSUES PERTAINING TO YOUR OPERATIONS. WE, THEREFORE,

RTECS: 9999999ZZ


DETERMINE WHETHER OR NOT YOUR PROGRAMS ARE ADEQUATE.

RTECS: 9999999ZZ


ETHYL ALCOHOL; (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 15-30%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


RESORCINOL (SARA III)

CAS: 108-46-3

RTECS: VG9625000

Fraction By Weight: 1-5%

OSHA PEL 10 PPM;20 PPM STEL

ACGIH TLV: 10 PPM;20 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN ABSORPTION:NOT EXPECTED TO
BE HARMFUL UNDER NORMAL CONDITIONS OF USE. INGEST:MAY BE HARMFUL IF
SWALLOWED. INHAL:MAY BE HARMFUL IF INHALED. LIQ/VAP CAN CAUSE IRRIT
OF NOSE, THROAT & LUNGS. S KIN:MAY CAUSE IRRIT ON PRLNG/RPTD
CONT.EYES:CAUSES IRRIT. ETHYL ALCOHOL:CAN CAUSE CNS DEPRESSION.
SIGNS(EFT OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:& SYMPTOMS MAY INCLUDE HDCH, DIZZ,
NAUS, VOMIT & DROW. RESORCINOL:OVEREXPOSURE MAY CAUSE THYROID DMG
BASED ON TEST W/LAB ANIMALS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:IMMED FLUSH W/PLENTY OF WATER FOR @ LST 15 MINS.
INGEST:DILUTE BY DRINKING LG QTYS OF WATER. IMMED CONT POIS CTL
CTR/HOSP EMER ROOM FOR ANY OTHER ADDNL TREATMENT DIRECTIONS.
INHAL:REMOVE TO FRESH AIR IF NOT BRTHG, GIVE ARTF RESP,
PREFMOUTH-TO-MOUTH. IF BRTHG IS DFCLT, GIVE O2. CALL MD. EYE:IMMED
FLUSH W/PLENTY OF WATER FOR @ LST 15 MINS. EYELIDS SHOULD BE HELD
APART DURING IRRIG TO (SUPDAT)

Fire Fighting

Flash Point Method:TOC
Flash Point:110F,43C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, "ALCOHOL" FOAM OR
CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL.
Unusual Fire/Explosion Hazard:COMBUSTIBLE. KEEP AWAY FROM HEAT & FLAME.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP W/
ABSORBENT MATERIAL & REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NOT HARMED BY FREEZING, BUT THAW
FROZEN RESIN SLOWLY & STIR BEFORE USING. STORE IN A COOL, DRY
PLACE. KEEP CONTAINER CLOSED. COMBUSTIBLE.
Other Precautions:AVOID PRLNG/RPTD CONT W/EYES, SKIN/CLTHG. AVOID BRTHG
VAPOR. USE W/ADEQ VENT. HANDLE I/A/W GOOD INDUS HYGIENE & SAFETY
PRACTICES. THESE PRACTICES INCLUDE AVOIDING UNNEC EXPOS & REMOVAL
OF MATL FROM EY ES, SKIN & CLOTHING.

Exposure Controls

Respiratory Protection:WHERE AIR CONTAM CAN EXCEED ACCEPT CRITERIA, USE
NIOSH/MSHA APPRVD RESP PROT EQUIP. RESPS SHLD BE SELECTED BASED ON
FORM & CONC OF CONTAM IN AIR I/A/W OSHA 29 CFR 1910.134/OTHER
APPLIC STDS/ GUIDELINE S.
Ventilation:IF AIRBORNE CONTAMS ARE GENERATED WHEN MATL IS
HEATED/HNDLD, SUFFICIENT VENT IN VOL & AIR FLOW PATTERNS SHLD BE
(SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
FIRST AID PROC:ENSURE WATER CONT W/ENTIRE SURF OF EYES & LIDS. CALL MD.
VENT:PROVIDED TO KEEP AIR CONTAM CONC LEVELS BELOW ACCEPT CRITERIA.
ENGINEERING CTLS:FOLLOWING EXPOS CTL TECHNIQUES MAY BE USED TO
EFTIVELY MIN EMPLOYEE EXPOS. LOC EXHS VENT, ENCLSD SYS DESIGN,
PROCESS ISOLATION & REMOTE CTL IN COMBINATION (ING 3)

Chemical Properties

HCC:F4
Spec Gravity:1.15
Appearance and Odor:RED BROWN LIQUID; MILD ALCOHOL ODOR.
Percent Volatiles by Volume:45

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:RECOVER FREE LIQ. ABSORB RESIDUE & DISPOSE OF
ACCORDING TO LOCAL, STATE & FEDERAL REQUIREMENTS. EMTPY CONTAINER
MAY CONTAIN EXPLOSIVE VAPORS. DO NOT CUT, PUNCTURE OR WELD ON OR
NEARBY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.